ACTEON IMPLANT CENTER 2

The alliance of technologies for fast and secure bone surgeries ACTEON ImplantCenter 2 surgical unit is specially designed to meet everyone’s priority of improving patient care.

The alliance of the most advanced ultrasonics and rotating technologies ensures total independence in all surgical applications (from implantology to periodontic therapy). Its LED handpieces and its large 5.7’’ touchsensitive screen make it the ideal combined device dedicated to bone surgery.

The benefits of surgical ultrasonic have been widely demonstrated: safe cut, minimal bone loss, optimal visibility, superior healing, reduced post-operative pain, comfort for both patient and practitioner.
Complete, the ImplantCenter 2 symbolizes the perfect association of safety and speed with 3 available modes:

  • Piezotome for pre-implant surgery,
  • I-SURGE implantology motor,
  • NEWTRON for all conventional treatments.
    Each program is easily customized and saved: ultrasonic power, speed rotation, contra-angle, irrigation, torque, etc.

The PIEZOTOME mode facilitates and improves the safety of delicate pre-implant surgical procedures such as: extraction, fine osteotomy, osteoplasty, sinus elevation (lateral and crestal), ridge expansion , Piezocision (surgical orthodontic treatment)… ImplantCenter 2 is active on hard tissues, limiting the risk of soft tissue lesions. The modulated piezo signal allows tissue relaxation and excellent cell repair for a clean cut and better healing.
The NEWTRON mode, intended for conventional treatment, allows the use of the widest range of tips on the market: More than 80 tips with different designs, alloys and coating for clinical versatility:

  • Prophylaxis
  • Periodontics
  • Implant Care
  • Endodontics
  • Surgical endodontics
  • Conservative and restorative dentistry

Thanks to the patented Colour Coding System, it is very easy to use, just choose the power of the colour of the tip to ensure best performances of each tip.
The I-SURGE rotating mode is especially convincing due to its constant torque and steady high-performance, even in lower revolution ranges. Also, with a wide range from 100 to 40 000 rpm, it offers the widest revolution range in its class. And with 6 N/cm, it delivers unrivalled torque in micro-motors.

Find out more

Technical Details

Technical characteristics

Electrical power supply

Voltage: 100 VAC to 230 VAC.

Frequency: 50 Hz/60 Hz.

Rated power: 250 VA at 230 VAC.

I-SURGE function

Operation:

Intermittent service: 20 sec. ON / 30 sec. OFF at 2 N.cm

Output characteristics:

I-SURGE micro-motor speed: 100 rpm to 40 000 rpm

I-SURGE micro-motor torque: max. 6 N.cm

Irrigation flow rate: 10 to 120 ml/min. (nominal value).

Adjustment in 10 ml/min. steps

Flush/prime flow rate: 120 ml/min.

PIEZOTOME function

Operation:

Intermittent service: 10 min. ON / 5 min OFF

Output characteristics:

No-load voltage: 250 volts (nominal value without handpiece)

Min. ultrasonic frequency: 28 kHz

Irrigation flow rate: 10 to 120 ml/min. (nominal value)

Adjustment in 10 ml/min. steps (nominal value)

Flush flow rate: 120 ml/min. (nominal value)

NEWTRON function

Operation:

Intermittent service: 10 min. ON / 5 min. OFF

Output characteristics:

No-load voltage: 150 volts (nominal value without handpiece)

Min. ultrasonic frequency: 28 kHz

Irrigation flow rate: 10 to 40 ml/min. (nominal value)

Adjustment in 1 ml/min. steps (nominal value)

Flush flow rate: 120 ml/min. (nominal value)

Protection

Electrical equipment class: Class 1

Electrical safety class:

Type BF in I-SURGE mode

Type BF in PIEZOTOME mode

Type BF in NEWTRON mode

Safety devices

Thermal safety shut off to avoid overheating of the I-SURGE micro-motor

Safety shut off if internal malfunction

2 fuses (power cord receptacle): 5 mm x 20 mm - 2 AT for 100 VAC to 230 VAC

1 internal fuse not accessible to the user reference F1: 5 mm x 20 mm – 10 AT / 250 VAC

Overall dimensions

Control unit:

Width: 472.9 mm

Height: 149.5 mm

Height with bracket: 471.1 mm

Depth: 339.9 mm

Weight: 5 kg without accessories

Footswitch:

Width: 311 mm

Depth: 209 mm

Height: 181 mm

Weight: approximately 3.5 kg

LCD screen:

Height: 86 mm

Width: 115 mm

Micro-motor cord: 2 000 mm (2 900 mm optional)

Scaler handpiece cord: 2 000 mm (2 900 mm optional)

PIEZOTOME handpiece cord: 2 000 mm (2 900 mm optional)

I-SURGE micro-motor:

Length: 99 mm

Diameter: 21 mm

Weight: 120 g

Coupling type: according to standard ISO 3964

Temperatures

Operation: +10°C to +40°C

Storage: -20°C to +70°C

Humidity

Operation: 30% to 75%

Storage: 10% to 100% including condensation

Atmospheric pressure

Between 500 hPa and 1060 hPa

Measuring units displayed and meaning

Ncm = torque (N.cm)

Rpm = speed (r/min.)

Read more

Videos